When it comes to strength and safety in aluminum and glass work, the first name that comes to mind is Tempered Glass. It is often called safety glass. In this post, we will tell you what tempered glass is, where its use is most necessary, and why it is better than ordinary glass.
What is Tempered Glass?
Tempered glass is made by putting ordinary glass through a special process. It is heated in a furnace to about 600 degrees Celsius and then immediately cooled with cold air. This process makes the outer surface of the glass extremely hard and strong.
Key Features of Tempered Glass
It is 4 to 5 times stronger than ordinary glass and can withstand heavy pressure or impact.
The biggest advantage of tempered glass is that if it breaks, it does not shatter into sharp pieces like ordinary glass, but turns into small grains, so the risk of injury is almost zero.
It can handle higher temperatures than normal glass. This is why it is also used in kitchen stoves and ovens.
Where Should Tempered Glass Be Used?
Because this glass is strong and safe, it must be used in the following places:
It should be used in shower cabins, staircases, and terrace partitions.
Tempered glass must be used in automatic sensor doors, large shop fronts, table tops, banks, and big shopping malls.
An Important Note
Tempered glass cannot be cut or drilled after it is made. Therefore, size measurements and holes are done before the glass is tempered. Once it is tempered for a specific place, it can only be installed there. Because if you try to cut or drill the glass after it is tempered, it shatters.
For more information about aluminum and glass work, visit our website.
0 Comments